2013-14 Shelby GT500 Trinity Supercharged 5.8L Custom Order

$18,749.99

Current Estimated Lead Times: 6 months

NOTE: These are increasingly RARE units and have tendency to extend lead times for search of proper donor vehicle. Purchasing this you are agreeing to the extended lead time possibility.

We are the only supplier of completely stand-alone swap ready turnkey Trinity 5.8L’s

This Swap Ready Turnkey pallet features a Ford Trinity Supercharged 5.8L engine out of a 2013-14 Shelby GT500 Mustang with standard less than 100,000 miles. It is a Trinity Supercharged 5.8L rated at 662 horsepower and 631 ft-lbs of torque from the factory. The VIN from your donor vehicle your donor vehicle will be provided.  This combination is perfect for any restomod, sleeper, or street/strip car. PLEASE CHOOSE YOUR CHOICE OF TRANSMISSION AND OTHER OPTIONAL UPGRADES BELOW.

The pictures are of a previous customers package and a representation of how your package will be shipped.

Out of stock

Description

Current Estimated Lead Times: 6 months

NOTE: These are increasingly RARE units and have tendency to extend lead times for search of proper donor vehicle. Purchasing this you are agreeing to the extended lead time possibility.

We are the only supplier of completely stand-alone swap ready turnkey Trinity 5.8L’s

This Swap Ready Turnkey pallet features a Ford Trinity Supercharged 5.8L engine out of a 2013-14 Shelby GT500 Mustang with standard less than 100,000 miles. It is a Trinity Supercharged 5.8L rated at 662 horsepower and 631 ft-lbs of torque from the factory. The VIN from your donor vehicle your donor vehicle will be provided.  This combination is perfect for any restomod, sleeper, or street/strip car. PLEASE CHOOSE YOUR CHOICE OF TRANSMISSION AND OTHER OPTIONAL UPGRADES ABOVE.

The pictures are of a previous customers package and a representation of how your package will be shipped.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Trinity 5.8L Supercharged engine 662HP 631 Ft-Lbs standard less than 100,000 miles
  • Your choice of transmission
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Your package will be set up similar to: