2013 Charger 5.7L and NAG1 HEMI Swap Kit 370HP 395LBFT 61k

Base Price: $6,499.99

Current lead time: 8 weeks

We are the only supplier of completely stand-alone swap ready turnkey HEMI’s

This Swap Ready Turnkey pallet features a Gen 3 Dodge Hemi 5.7L  engine out of a 2013 Charger. It is a 5.7L Hemi rated at 370 horsepower and 395 ft-lbs of torque from the factory. Mated up to it will be the 2wd NAG1 5-speed automatic transmission! The VIN from this donor vehicle is: 2C3CDXCT8DH582886. This Charger had 61,282 miles on it. This is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

Will be set up similar to:

In stock

  • We can remove the factory Mutliple Displacement System(MDS: where it disables 4 cylinders to improve fuel economy which causes lots of lifter problems and upgrade the factory cam in your Gen 3 Hemi engine to a custom cam and valve springs upgrade specific to your build. This includes parts and installation! All parts will come from Texas Speed and Performance. A base "start up" tune will be included. Dyno tune by a local tuner will be required after installation. Their work is not covered or warrantied.
  • The late model Mopar drivetrains never featured a serpentine driven hydraulic power steering pump. They utilized electric power steering. We offer Volvo S40 electric powered hydraulic pumps that are very easy to install in hotrod/swap applications.

Description

Current lead time: 8 weeks

We are the only supplier of completely stand-alone swap ready turnkey HEMI’s

This Swap Ready Turnkey pallet features a Gen 3 Dodge Hemi 5.7L  engine out of a 2013 Charger. It is a 5.7L Hemi rated at 370 horsepower and 395 ft-lbs of torque from the factory. Mated up to it will be the 2wd NAG1 5-speed automatic transmission! The VIN from this donor vehicle is: 2C3CDXCT8DH582886. This Charger had 61,282 miles on it. This is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Gen 3 Hemi 5.7L engine 370HP 395 Ft-Lbs 61,282 miles
  • NAG1 2wd 5-speed automatic
  • Flashed ECM – SKIM removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fan (pre-wired for ease of installation)
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Will be set up similar to: