2013 Shelby GT500 Trinity Supercharged 5.8L and TR6060 6 speed MT 662HP 631LBFT *BALANCE*

$12,300.00

We are the only supplier of completely stand-alone swap ready turnkey Trinity 5.8L’s

This Swap Ready Turnkey pallet features a Ford Trinity Supercharged 5.8L engine out of a 2013 Shelby GT500 Mustang. It is a Trinity Supercharged 5.8L rated at 662 horsepower and 631 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1ZVBP8JZ3D5281555. Mated up to will be a Tremec TR6060 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car. Freshly rebuild including Darton Cylinder sleeves have been installed.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

In stock

Category:

Description

We are the only supplier of completely stand-alone swap ready turnkey Trinity 5.8L’s

This Swap Ready Turnkey pallet features a Ford Trinity Supercharged 5.8L engine out of a 2013 Shelby GT500 Mustang. It is a Trinity Supercharged 5.8L rated at 662 horsepower and 631 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1ZVBP8JZ3D5281555. Mated up to will be a Tremec TR6060 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car. Freshly rebuild including Darton Cylinder sleeves have been installed.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Trinity 5.8L Supercharged engine 662HP 631 Ft-Lbs FRESHLY REBUILT INCLUDING DARTON CYLINDER SLEEVES INSTALLED
  • Tremec TR6060 6 Speed Manual Transmission
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change
  • WANTS A/C Stuff: Compressor, Condensor, Lines, etc…

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: