2015 Challenger SCAT PACK 6.4L and 8HP70 Automatic HEMI Swap Kit 485HP 475LBFT 73K

$10,749.99

Come check out this package at Holley Moparty 9-18 thru 9-20 @ Beech Bend Raceway in Bowling Green, KY.

We are the only supplier of completely stand-alone swap ready turnkey HEMI’s

This Swap Ready Turnkey pallet features a Gen 3 Dodge Hemi 6.4L  engine out of a 2015 Challenger SCAT PACK with 73,336 miles. It is a 6.4L Hemi rated at 485 horsepower and 475 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 2C3CDZFJ0FH849771. Mated up to it is a 8HP70 8-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

In stock

Description

Come check out this package at Holley Moparty 9-18 thru 9-20 @ Beech Bend Raceway in Bowling Green, KY.

We are the only supplier of completely stand-alone swap ready turnkey HEMI’s

This Swap Ready Turnkey pallet features a Gen 3 Dodge Hemi 6.4L  engine out of a 2015 Challenger SCAT PACK with 73,336 miles. It is a 6.4L Hemi rated at 485 horsepower and 475 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 2C3CDZFJ0FH849771. Mated up to it is a 8HP70 8-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Gen 3 Hemi 6.4L 485 hp and 475 ft-lbs 73,336 miles
  • 8HP70 8-speed automatic transmission
  • Flashed ECM – SKIM removed
  • TCM and stand-alone automatic transmission controller included
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fan (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change