2015 F150 Gen II Coyote 5.0L and 2wd 6R80 Turnkey Swap Kit 65k

$6,499.99

This Swap Ready Turnkey pallet features a Gen II Ford Coyote engine out of a 2015 F150 with 65k miles. It is a Coyote 5.0L rated at 385 horsepower and 387 ft-lbs of torque from the factory. The VIN is 1FTEX1CF5FFC11966. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

Will be setup similar to this upon completion:

In stock

Description

Will be setup similar to this upon completion:

 

This Swap Ready Turnkey pallet features a Gen II Ford Coyote engine out of a 2015 F150 with 65k miles. It is a Coyote 5.0L rated at 385 horsepower and 387 ft-lbs of torque from the factory. The VIN is 1FTEX1CF5FFC11966. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote 5.0L engine 385HP 387 Ft-Lbs  65,000 miles
  • 2wd 6R80 automatic 6-speed transmisson
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change