Available to ship immediately with wire-transfer.
We are the only supplier of completely stand-alone swap ready turnkey HELLCATS
This Swap Ready Turnkey pallet features a Dodge HELLCAT 6.2L engine out of a 2016 Challenger SRT with 9,421 actual miles. It is a 6.2L HELLCAT rated at 707 horsepower and 650 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 2C3CDZC9XGH344431. Mated up to it is a 8HP90 8-speed heavy-duty automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
This kit includes:
- Turnkey HELLCAT 6.2L 707 hp and 650 ft-lbs 9,421 actual miles
- 8HP90 8-speed automatic transmission
- Flashed ECM – SKIM removed UNLOCKED GPEC2A for HP Tuners Tuning
- TCM and stand-alone automatic transmission controller included
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Cooling Fan (pre-wired for ease of installation)
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change
WILL BE SET UP SIMILAR TO: