2016 Mustang 5.0L GEN II Coyote MT Swap Kit 435HP 400LBFT 23K

$9,249.99

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote GEN II engine out of a 2016 Mustang GT with 23,897 miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN from this donor vehicle is 1FA6P8CF5G5210634. Mated up to it is a MT82 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Out of stock

Category:

Description

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote GEN II engine out of a 2016 Mustang GT with 23,897 miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN from this donor vehicle is 1FA6P8CF5G5210634. Mated up to it is a MT82 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote GEN II 5.0L engine 435HP 400 Ft-Lbs 23,897 miles
  • MT82 6 Speed Manual Transmission
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: