2017 GT350 Voodoo 5.2L Turnkey Swap Kit

$24,999.99

We are the only supplier of completely stand-alone swap ready turnkey Voodoo 5.2L’s

This Swap Ready Turnkey pallet features a Ford Performance Voodoo 5.2L Flat Plane Crank engine out of a 2017 Mustang GT with 9,558 miles. It is a Voodoo 5.2L rated at 526 horsepower and 429 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8JZ2H5524627. Mated up to will be a Tremec Magnum 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

Out of stock

Description

We are the only supplier of completely stand-alone swap ready turnkey Voodoo 5.2L’s

This Swap Ready Turnkey pallet features a Ford Performance Voodoo 5.2L Flat Plane Crank engine out of a 2017 Mustang GT with 9,558 miles. It is a Voodoo 5.2L rated at 526 horsepower and 429 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8JZ2H5524627. Mated up to will be a Tremec Magnum 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Voodoo 5.2L flat plane crank engine 526HP 429 Ft-Lbs 9,558 miles
  • Tremec Magnum 6 Speed Manual Transmission
  • PRC Radiator – Custom for Early Mustang
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: