2018 GT350 Flatplane Crank 5.2L Voodoo & TR3160 6 Speed Manual 2k miles

$19,999.99

We are the only supplier of completely stand-alone swap ready turnkey Voodoo 5.2L’s

This Swap Ready Turnkey pallet features a Ford Performance Voodoo 5.2L Flat Plane Crank engine out of a 2018 Mustang Shelby GT350 with 2,349.5 miles. It is a Voodoo 5.2L rated at 526 horsepower and 429 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8JZ1J5503032. Mated up to it is the factory Tremec TR3160 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

In stock

Description

We are the only supplier of completely stand-alone swap ready turnkey Voodoo 5.2L’s

 

This Swap Ready Turnkey pallet features a Ford Performance Voodoo 5.2L Flat Plane Crank engine out of a 2018 Mustang Shelby GT350 with 2,349.5 miles. It is a Voodoo 5.2L rated at 526 horsepower and 429 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8JZ1J5503032. Mated up to it is the factory Tremec TR3160 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Voodoo 5.2L flat plane crank engine 526HP 429 Ft-Lbs 2,349.5 miles
  • Tremec TR3160 6 Speed Manual Transmission
  • Radiator
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • MGW Short-throw shifter
  • Stand-Alone wiring harness
  • SCT X4 Handheld
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change