We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s
This Swap Ready Turnkey pallet features a Ford Coyote 5.0L GEN 3 engine out of a 2018 Mustang GT with 5,437 miles. It is a Coyote 5.0L rated at 460 horsepower and 420 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8CF3J5129560. This combination is perfect for any restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE FORD’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
This kit includes:
Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19
- Turnkey Coyote GEN 3 5.0L engine 460HP 420 Ft-Lbs
- MT-82 6 speed manual transmission
- Flashed ECM – ePATS removed
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change
UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: