Description
Current Lead Time: 10 weeks
We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s
This Swap Ready Turnkey pallet features a Ford Coyote 5.0L GEN III engine out of a 2019 Mustang with 47,811 miles. It is a Coyote 5.0L rated at 460 horsepower and 420 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FA6P8CF0K5129386. Mated up to it is a 2wd 10R80 10-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE FORD’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
This kit includes:
- Turnkey Coyote GEN III 5.0L engine 460HP 420 Ft-Lbs 47,811 miles
- 2wd 10R80 10 speed automatic transmission
- Flashed ECM – ePATS removed
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Radiator
- Cooling Fans (pre-wired for ease of installation)
- Driveshaft
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change
UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: