Current Lead Time: 8 Weeks
We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s
This Swap Ready Turnkey pallet features a Ford Coyote engine out of a 2011+ F150 with less than 125,000 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN from this vehicle is: unkown at this time. Mated up to it is a 4wd 6R80 6-speed automatic transmission. This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
Your kit will be set up similar to this:
This kit includes:
- Turnkey Coyote 5.0L engine 360HP 380 Ft-Lbs less than 125,000 miles
- 4wd 6R80 6-Speed Automatic
- Flashed ECM – ePATS removed
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Cooling Fans (pre-wired for ease of installation)
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change