F150 Coyote Swap 5.0L and 2wd 6R80 78K Mile

$5,999.99

This Swap Ready Turnkey pallet features a Ford Coyote engine out of a 2011 F150 with 78,753 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN is: 1FTNF1CF1BKD60945. This combination is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

Out of stock

Description

This Swap Ready Turnkey pallet features a Ford Coyote engine out of a 2011 F150 with 78,753 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN is: 1FTNF1CF1BKD60945. This combination is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote 5.0L engine 360HP 380 Ft-Lbs 78,753 miles
  • 2wd 6R80 6-Speed Automatic
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

YOUR KIT WILL BE SET UP JUST LIKE THIS EXAMPLE!