Gen 3 Mustang Coyote 10R80 Control Pack MOD SERVICE

Base Price: $999.99

Send us your existing harness for modification into a stand-alone Coyote control pack. Save time and money to get your 2018+ Mustang Coyote 5.0L and 10R80 automatic swap project underway! See instructions below as to what we need to complete the modification service for you! If you have questions please call 866-321-6277

Be sure to make fuseblock selection from drop-down menus below!

This is a service. We are modifying YOUR harness that YOU ship to us.

We require you ship us your ECM for calibration to be completed. Our modified harness control pack will not start your engine without a PATS deleted ECM that is flashed with our control pack file.

Description

Send us your existing harness for modification into a stand-alone Coyote control pack. Save time and money to get your 2018+ Mustang Coyote 5.0L and 10R80 automatic swap project underway! See instructions below as to what we need to complete the modification service for you! If you have questions please call 866-321-6277

This is a service. We are modifying YOUR harness that YOU ship to us.

Requires return type fuel system, will not work with returnless fuel system

How To:

Ship us your under-hood fuseblock harness to get modified. The harness we need is connected to the VEH connector on the ECM. (See Diagram Below) This harness routes to the vehicle fuseblock, interior gas pedal, OBD2 port, and MAF sensor.

Gen 3 Coyote ECM Showing “VEH” Connector.

You can also choose the option to send us your ECM for PATS (Passive Anti-Theft System) disabling. We can program your ECM to run with our stand-alone Coyote control pack. Select this choice from the drop down menus above.

Fuseblock:

Our fuseblock is an effective solution that has what it takes to run and operate your Coyote.

  • Fuel Pump Relay and output
  • Hi Speed Fan Relay and output
  • Low Speed Fan Relay and output
  • Fused engine power supply
  • Shift Up/Down Select Shift Control (for 10R80)
  • Ignition power supply and ignition switch leads
  • ODB2 Port