Sale!

Gen I 2014 F150 Coyote 5.0L and 2wd 6R80 Swap Kit 50k

$5,999.99 $5,499.99

Current Lead Time: 8 weeks

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote 5.0L GEN I engine out of a 2014 F150 with 50,245 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FTNF1CF4EKD63648. Mated up to it is a 2wd 6R80 6-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT:

In stock

Description

Current Lead Time: 8 weeks

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote 5.0L GEN I engine out of a 2014 F150 with 50,245 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN from this donor vehicle is: 1FTNF1CF4EKD63648. Mated up to it is a 2wd 6R80 6-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

OUR KIT DOES NOT REQUIRE FORD’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey F150 Coyote GEN I 5.0L engine 360HP 300 Ft-Lbs 50,245 miles
  • 2wd 6R80 6 Speed Manual Transmission
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • SCT X4 Handheld
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: