Gen I F150 Coyote Swap Kit 5.0L 360HP 380LBFT

$5,749.99

Current Lead Times: 6 months

This Swap Ready Turnkey pallet features a Gen I Ford Coyote engine out of a 2011-14 F150 with Less than 150,000 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN will be provided. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

Categories: , ,

Description

Current Lead Times: 6 months

This Swap Ready Turnkey pallet features a Gen I Ford Coyote engine out of a 2011-14 F150 with Less than 150,000 miles. It is a Coyote 5.0L rated at 360 horsepower and 380 ft-lbs of torque from the factory. The VIN will be provided. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote 5.0L engine 360HP 380 Ft-Lbs  Less than 150,000 miles
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft (only on 2wd transmission selection)
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change