GEN II Coyote and 6R80 <50k

$9,249.99

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote GEN II engine out of a 2015-17 Mustang GT with Less than 50k miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN from this donor vehicle will be provided. Mated up to it is a 6R80 6-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Out of stock

Category:

Description

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote GEN II engine out of a 2015-17 Mustang GT with Less than 50k miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN from this donor vehicle will be provided. Mated up to it is a 6R80 6-speed automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote GEN II 5.0L engine 435HP 400 Ft-Lbs <50k miles
  • 6R80 6 Speed Automatic Transmission
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

UPON COMPLETION IT WILL BE SETUP SIMILAR TO THIS KIT: