PREORDER Gen II F150 Coyote 5.0L 385HP 387LBFT

Base Price: $6,249.99

This Swap Ready Turnkey pallet features a Gen II Ford Coyote engine out of a 2015-2107 F150 with Less than 75k miles. It is a Coyote 5.0L rated at 385 horsepower and 387 ft-lbs of torque from the factory. The VIN will be provided. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

  • The standard mileage we offer is less than 75,000 miles. You can order with more miles for a discount or less miles for an addiction cost.
  • Do you need a transmission or have you already got one set aside for your Coyote swap project? Choose the perfect transmission for your swap project!
  • Do you want to dress up your F150 engine to give it the more appealing look that the Mustang Coyote has? You can add on the Mustang top engine cover and the valve cover inserts that say "Powered By Ford" to give it to desired look you want!
  • We will put the same intake manifold on your Coyote that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. This Includes parts and labor.
Category:

Description

This Swap Ready Turnkey pallet features a Gen II Ford Coyote engine out of a 2015-2107 F150 with Less than 75k miles. It is a Coyote 5.0L rated at 385 horsepower and 387 ft-lbs of torque from the factory. The VIN will be provided. This is perfect for any Ford Bronco, F100 restomod, sleeper, or street/strip car.

Now including SCT X4 Handheld’s with Coyote Swap Orders from 6/20/19

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote 5.0L engine 385HP 387 Ft-Lbs  Less than 75,000 miles
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • SCT X4 Handheld
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change