Gen II Mustang Coyote 5.0L 435HP 400LBFT

Base Price: $8,249.99

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2011-2014 Mustang with less than 50,000 miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 6R80 automatic or the fun MT82 6 speed manual! This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.

Lead time from date of purchase is ~6 weeks to get built and prepared for shipment.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Gen II 2015-17 Mustang Coyote 5.0L engine 435HP 400LBFT less than 50,000 miles
  • Your choice of transmission
  • Flashed PCM – ePATS removed – Our PCM’s are still tunable by your local dyno
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Your kit will be set up similar to this:

  • The standard mileage we offer is less than 50,000 miles. You can order with more miles for a discount or less miles for an addiction cost.
  • Do you need a transmission or have you already got one set aside for your Coyote swap project? Choose the perfect transmission for your swap project!
  • If you selected a 4WD transmission choose one of the following options.
  • We will put the same intake manifold on your Coyote that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. This Includes parts and labor.

Description

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2011-2014 Mustang with less than 50,000 miles. It is a Coyote 5.0L rated at 435 horsepower and 400 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 6R80 automatic or the fun MT82 6 speed manual! This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.

Lead time from date of purchase is ~6 weeks to get built and prepared for shipment.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Gen II 2015-17 Mustang Coyote 5.0L engine 435HP 400LBFT less than 50,000 miles
  • Your choice of transmission
  • Flashed PCM – ePATS removed – Our PCM’s are still tunable by your local dyno
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Your kit will be set up similar to this: