Gen III Mustang Coyote Swap Kit 5.0L 460HP 420LBFT

$11,499.99

Current Lead Times: 6 months

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2018+ Mustang with less than 75,000 miles. It is a Coyote 5.0L rated at 460 horsepower and 420 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 10 speed 10R80 automatic or the fun MT82 6 speed manual! Please choose your choice of transmission below as well as other optional upgrades. This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.

Categories: , ,

Description

Current Lead Times: 6 months

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Performance Coyote engine out of a 2018+ Mustang with less than 75,000 miles. It is a Coyote 5.0L rated at 460 horsepower and 420 ft-lbs of torque from the factory. The VIN will be provided to you from your specific donor vehicle. You can choose your transmission option from the highly sought 10 speed 10R80 automatic or the fun MT82 6 speed manual! This combination is perfect for any Ford Bronco, restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Gen 3 2018+ Mustang Coyote 5.0L engine 460HP 420LBFT less than 75,000 miles
  • Your choice of transmission 10R80/MT-82
  • Flashed PCM – ePATS removed – Our PCM’s are still tunable by your local dyno
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft (only on 2wd transmission selection)
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Your kit will be set up similar to this: