HELLCAT Swap Kit 6.2L 707HP 650LBFT Custom Order
$21,999.99
Current Lead Times: 6 months
We are the only supplier of completely stand-alone swap ready turnkey HELLCAT SWAP KITS
This Swap Ready Turnkey pallet features a Dodge HELLCAT 6.2L engine out of a Charger/Challenger SRT with less than 75,000 miles. It is a 6.2L HELLCAT rated at 707 horsepower and 650 ft-lbs of torque from the factory. The VIN from your donor vehicle will be provided. Please select your choice of transmission in the options above. Choose between the popular 8HP90 8-speed heavy-duty automatic transmission or the 3-pedal manual transmission options. This combination is perfect for any restomod, sleeper, or street/strip car.
Features unlocked GPEC2A ECM for HP Tuners Tuning.
WILL BE SET UP SIMILAR TO:
Description
Current Lead Times: 6 months
We are the only supplier of completely stand-alone swap ready turnkey HELLCAT SWAP KITS
This Swap Ready Turnkey pallet features a Dodge HELLCAT 6.2L engine out of a Charger/Challenger SRT with less than 75,000 miles. It is a 6.2L HELLCAT rated at 707 horsepower and 650 ft-lbs of torque from the factory. The VIN from your donor vehicle will be provided. Please select your choice of transmission in the options above. Choose between the popular 8HP90 8-speed heavy-duty automatic transmission or the 3-pedal manual transmission options. This combination is perfect for any restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
This kit includes:
- Turnkey HELLCAT 6.2L 707 hp and 650 ft-lbs
- Your choice of transmission
- Flashed ECM – SKIM removed UNLOCKED GPEC2A for HP Tuners Tuning
- TCM and stand-alone automatic transmission controller included ***only for auto transmissions
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Radiator
- Cooling Fan (pre-wired for ease of installation)
- Driveshaft
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change