Current Lead Time: 12 Weeks
We are the only supplier of completely stand-alone swap ready turnkey HEMI’s
This Swap Ready Turnkey pallet features a Gen 3 Dodge Hemi 6.4L engine out of a Challenger/Charger with less than 100,000 miles. It is a 6.4L Hemi rated at 485 horsepower and 475 ft-lbs of torque from the factory. The VIN from this donor vehicle is: TBD. Mated up to it is a 4wd 4-speed automatic NAG1 transmission. This combination is perfect for any restomod, sleeper, or street/strip car.
OUR KIT DOES NOT REQUIRE MOPAR’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MOPAR STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.
This kit includes:
- Turnkey Gen 3 Hemi 6.4L 485 hp and 475 ft-lbs less than 100,000 miles
- NAG1 5-speed automatic transmission
- Flashed ECM – SKIM removed
- TCM and stand-alone automatic transmission controller included
- OBD2/DLC connector (wired up and ready to be used to tune)
- Stand-Alone wiring harness
- Fuel Pump (pre-wired for ease of installation)
- Cooling Fan (pre-wired for ease of installation)
- Turnkey pallet (ready to run by adding battery and fuel cell)
- Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
- Fresh oil change