LSA Supercharged Swap Kit 6.2L and 6L90E 6 Speed Auto *REBUILT & UPGRADED*

$19,999.99

This Swap Ready Turnkey pallet features a Chevrolet engine out of a 2012 Cadillac CTS-V with 24,526 miles (ENGINE HAS BEEN FRESHLY REBUILT). It is a LSA 6.2L rated at 556 horsepower and 551 ft-lbs of torque from the factory. With the listed upgrades and custom tuning it is expected to make ~750 Crank Horsepower. The VIN from this vehicle is: 1G6DV5EP8C0104233. Mated up to it is the 6L90E 6-speed heavy duty automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Listen to it run!

Out of stock

Description

This Swap Ready Turnkey pallet features a Chevrolet engine out of a 2012 Cadillac CTS-V with 24,526 miles (ENGINE HAS BEEN FRESHLY REBUILT). It is a LSA 6.2L rated at 556 horsepower and 551 ft-lbs of torque from the factory. With the listed upgrades and custom tuning it is expected to make ~750 Crank Horsepower. The VIN from this vehicle is: 1G6DV5EP8C0104233. Mated up to it is the 6L90E 6-speed heavy duty automatic transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

This kit includes:

  • Turnkey LSA Supercharged 6.2L engine ESTIMATED 750 CRANK HP WITH UPGRADES

    ENGINE UPGRADES:
    – Freshly Rebuilt – See photos of part of the rebuild process
    – Cast Iron Sleeved Cylinder’s
    – ID1050X Injectors
    – DSS Forged Pistons
    – Total Seal Rings
    – Lunati H-Beam Voodoo Series Rods 6.125″ Length
    – Scoggin-Dickey LS Stage 1 Blower Cam 224/236 .581″/.602″ 116LSA
    – Dual Valve Springs
    – Upgraded Rocker Arm Trunnion Bearings
    – ARP Studded Main’s
    – Lingenfelter 2.40″ Overdrive Blower Pulley
    – Longtube Headers
  • 6L90E 2wd 6 Speed Heavy Duty Automatic Transmission
  • Flashed ECM – VATS removed
  • Custom Tune for the upgrades
  • Stand-Alone wiring harness
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

Listen to it run!