Turnkey Coyote Swap Kit 5.0L and 6 Speed Manual Transmission Kit 47k

$7,749.99

This Swap Ready Turnkey pallet features a Ford Coyote Performance engine out of a 2014 Mustang GT with 47,226 miles. It is a Coyote 5.0L rated at 420 horsepower and 390 ft-lbs of torque from the factory. The VIN from this vehicle is: 1ZVBP8CF9E5216827. Mated up to it is a 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

In stock

SKU: JC012F Categories: ,

Description

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a Ford Coyote Performance engine out of a 2014 Mustang GT with 47,226 miles. It is a Coyote 5.0L rated at 420 horsepower and 390 ft-lbs of torque from the factory. The VIN from this vehicle is: 1ZVBP8CF9E5216827. Mated up to it is a 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORDS PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote 5.0L engine 420HP 390 Ft-Lbs 47,226 miles
  • 6 Speed Manual Gearbox
  • Flashed ECM – ePATS removed
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change

UPON COMPLETION IT WILL BE SETUP JUST LIKE THIS KIT: