TWIN TURBO 2017 Mustang 5.0L GEN II Coyote MT82 Manual Swap Kit 435HP 400LBFT 28K

$12,999.99

Current Lead Time: Ready for shipment with wire-transfer transaction

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a TWIN TURBO Ford Coyote 5.0L GEN II engine out of a 2017 Mustang GT with 28,094 miles. It is a Coyote 5.0L rated at factory 435 horsepower and 400 ft-lbs of torque from the factory. This engine package features a COMPLETE ON3 Performance twin turbo setup. The VIN from this donor vehicle is: 1FA6P8CF8H5304993. Mated up to it is a MT82 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

Out of stock

Description

Current Lead Time: Ready for shipment with wire-transfer transaction

We are the only supplier of completely stand-alone swap ready turnkey Coyote 5.0’s

This Swap Ready Turnkey pallet features a TWIN TURBO Ford Coyote 5.0L GEN II engine out of a 2017 Mustang GT with 28,094 miles. It is a Coyote 5.0L rated at factory 435 horsepower and 400 ft-lbs of torque from the factory. This engine package features a COMPLETE ON3 Performance twin turbo setup. The VIN from this donor vehicle is: 1FA6P8CF8H5304993. Mated up to it is a MT82 6-speed manual transmission. This combination is perfect for any restomod, sleeper, or street/strip car.

OUR KIT DOES NOT REQUIRE FORD’S PERFORMANCE HARNESS & PCM. THIS KIT IS A STANDALONE ENGINE SWAP KIT THAT IS READY TO BE INSTALLED INTO YOUR SWAP PROJECT. IT DOES NOT REQUIRE THE FACTORY MUSTANG STEERING COLUMN, RADIO, OR ANY OTHER MODULE: THE PCM THAT IS PROVIDED IN THE KIT IS ALL YOU NEED FOR THIS KIT TO RUN AND BE SWAPPED INTO YOUR PROJECT.

This kit includes:

  • Turnkey Coyote GEN II 5.0L engine 435HP 400 Ft-Lbs 28,094 miles
  • MT82 6 speed manual transmission
  • Complete ON3 Performance Twin Turbo Set Up
    Twin 65mm ON3 Performance Turbos
    VMP Boost a pump fuel pump driver booster
    Gen 3 Mustang Intake
    ON3 Performance Intercooler
    ON3 Performance Turbo Piping
  • Flashed ECM – ePATS removed Features Palm Beach Dyno Base Tune
  • OBD2/DLC connector (wired up and ready to be used to tune)
  • Stand-Alone wiring harness
  • Fuel Pump (pre-wired for ease of installation)
  • Radiator
  • Cooling Fans (pre-wired for ease of installation)
  • Driveshaft
  • Turnkey pallet (ready to run by adding battery and fuel cell)
  • Pallet + Wood (good for burning and having a nice bonfire after you have completed your swap)
  • Fresh oil change